Easy to Build Personalized Kitchen Tray - The PERFECT Gift!

Easy to Build Personalized Kitchen Tray - The PERFECT Gift!

Introducing the DIY Personalized Kitchen Tray – the heartwarming and delightful gift that's as easy to create as it is to enjoy! 🎁🍽️ 

Are you ready to spread love and joy to your favorite people, whether they're newlyweds, new homeowners, or just special someone's in your life? With this personalized kitchen tray, you'll be giving the gift of warmth, comfort, and endless memories!

🛠️ Crafting this tray is a breeze. You don't need to be a DIY expert; all you need is a little creativity and a dash of love. Here's how to make it a truly unique and cherished present shown to us by Simply Ciani with all materials available to you at Owens Supply Co.!

Materials:

Wood Products
3 Board, 1x4, 96"
1 Board, 1x2, 48"

Hardware & Supplies
24" Long Cabinet Handles
11-1/4" Kreg Screws
11-1/4" Wood Screws

Cut List & Parts
61x4" Boards - Bottom of Tray, 28-1/8"
21x2" - Side Trim of Tray, 21"

 

Step 1:

Cut your 1x4 boards to 28-1/8", you should cut (6) identical boards or grab them pre cut here at our warehouse. 

Step 2:

Cut your 1x2 boards to 21", you should cut (2) identical boards.

Step 3:

Begin to drill your pocket holes into your 1x4 boards setting the jig to 3/4".

Step 4:

Drill 3 pocket holes into (5) 1x4 boards, leaving one board without pocket holes.

Step 5:

Line up your cut 1x4x28-1/8" boards evenly, placing the board without pocket holes in the middle.

Step 6:

Begin attaching your boards together using 1-1/4" screws.

Step 7:

Stain the base and 2 ends (not yet assembled) of your tray with your favorite-colored stain. (We have some stains half off, right now here at Owens!)

Step 8:

Attach the handles to the middle of your 1x2x21" boards, sinking the screws into the wood so that the wood will sit flush on the bottom part of your tray once assembled. The 4" can also be found at Owens Supply Co. in Pembroke, located in our cabinet hardware section.

Step 9:

Attach your side trim with handles attached to the base of your tray using 1-1/4" wood screws, screwing the trim in from the bottom.

Add a finishing touch:

Hand paint in your own handwriting or even have the kiddos handprints painted onto the tray for a fun gift for any mom, dad, aunt, uncle, friend, or grandparent! This tray fits perfectly on top of any standard stove top!

You can get ALL the materials to make this super easy craft here at Owens Supply Co.!

 


Leave a comment

Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.